|
 |
|
Microfiberglass
Filter Cartridges |
|
These filter cartridges are designed to provide the
most economical solution for a wide range of filtration
problems. State of the art microfiberglass is
layered with spun bonded polyester to produce highly
efficient particulate removal with extremely low pressure
drops. The pleated construction allows greater
surface area than depth type cartridges which translates
directly into longer life
|
|
Microfiberglass with Polypropylene Endcaps
MATERIALS OF CONSTRUCTION:
Media:
Microfiberglass layered with spun bonded
polyester: 50 micron is 100% polyester.
Support Materials: Polypropylene
End Caps: Polypropylene
NOMINAL MICRON RATINGS:
0.1, 0.2, 0.45, 1.0, 3.0, 10.0, 30.0, 50.0
Ratings derived from independent laboratory tests using
latex bead suspensions and particle counter readings.
|
EFFECTIVE FILTRATION AREA:
4 square feet per layer per 10 inch length
DIMENSIONS:
2¾" OR 2½" OD x 1"ID
Nominal 5", 9¾", 10", 19½", 20",
29¼", 30", 39", and 40" length
OPERATING CHARACTERISTICS:
To 75 psid at 68°F
To 40 psid at 150°F
|
|
|
|
